| Last Modified: 11-29-2007 | 1.6 A | |
| Service Category: Engine/Hybrid System | Section: Emission Control | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM0000030JC00AX |
| Title: 3UR-FE EMISSION CONTROL: AIR INJECTION DRIVER: REMOVAL (2008 Sequoia) | ||
REMOVAL
1. REMOVE AIR INJECTION CONTROL DRIVER ASSEMBLY
(a) Disconnect the 4 air injection control driver connectors.
|
(b) Remove the bolt and disconnect the ground cable. |
(c) Disconnect the 2 wire harness clamps.
|
(d) Remove the 3 bolts and air injection control driver. |
2. REMOVE AIR INJECTION CONTROL DRIVER (for Bank 1)
(a) Remove the 2 bolts.
|
(b) Remove the 2 screws and air injection control driver. |
3. REMOVE AIR INJECTION CONTROL DRIVER (for Bank 2)
(a) Remove the 2 screws and air injection control driver.
|
|